Removing rear seats

These aren’t hard but you get a lot of posts asking how you do it, so here you go.

Lift out the rear luggage storage box (if you have one). This clips in and can take some force.

Lift up the seat base, first from the front. The front has some metal bits that go into some plastic clips so it takes a little force. Just lift it up a bit out of the clips, don’t fully pull it out.

Disconnect the passenger detect wiring from the base of the seat.

Now you can disconnect the wiring from the seatbelt clips which goes onto the folding part of the seat.

Undo the seat belt ends with the 14mm nut – one per side

14mm bolts (x4) at the front of the seat folding part